Welcome to Motorcycles Guide
Order Suzuki Motorcycle Accessories Article
. For a permanent link to this article, or to bookmark it for further reading, click here.
Restoration 101-On Your Motorcycle
from: JG MashinoTearing It Down
You’ve picked your bike out, made a few new friends, gathered together a few books to guide you and your garage is outfitted and ready to go, so now it’s time to…go on a drinking binge? Ah, no, that’s probably not a good idea; remember you’ve got this incredible piece of machinery just waiting for you to bring it back to life. Let’s tear it down.
Mindset
All through life your friends have told you how mechanically inclined you are, so this is a chance to really show your stuff. As you tear down you will slay many dragons along the way, but keep your chin up, have fun and later will feel the pride that comes with doing it yourself and see the fruits of your labor in the rebirth of the machine.
Session Time
Begin your first session without any set time. Work as much or as little as you like and take breaks along the way. One thing will lead to another and before you know it you’ll have a carcass of a motorcycle before you.
As you work along, there aren’t many guidelines to follow in terms of the order by which you break the bike down, other than what you are restricted to by way of how the bike is put together.
I like to start by removing the carburetors and doing the rebuild on them before taking the next part off the bike. Others may want to do the entire tear down, clean each part up and then rebuild. It’s up to you.
Nasty Bolts and Nuts
Along the way you may encounter some rusted bolts ands nuts. You may try turning them with as wrench, but before you try too hard, consider spraying them with rust solvent and coming back to them 6-12 hours later. In the meantime there’s always plenty of other things to do.
Getting Rid of Rust
Your mission as you tear down it to eliminate every spec of rust from the bike before any repainting or rebuilding occurs. To do this you will use a few different tricks.
Wire Brushes & a Scotch Pad
Wire brushes and abrasive pads are our friends. They work wonders at getting rid of rust and bringing a piece back to it’s original look. When you begin the process of rust removal start with a wire brush. If it’s a tight spot, use an abrasive pad like a 3M Scotchpad.
Abrasive pads are also finer than a metal brush, so if you’re dealing with a shinny surface use the pad instead of a brush.
Use water while you work as this allows you to move the brush easier and keeps the dust level down. Wipe the part with a rag now and then, inspect and keep scrubbing until you’ve eliminated the rust.
In some case you will be able to remove the discoloration. This is typical on frames and some aluminum parts.
For frames and other parts you will eventually paint, remove as much rust with a wire brush and abrasive pad. While working with the water feel free to add a little naval jelly to the mix. And don’t forget to wear your thick gloves during this process as Naval Jelly and skin don’t mix together well.
Finally use a rust to oxide conversion liquid (Rustoleum makes one) which will turn the rust to an oxide and allow proper bonding of the surface during the paint priming stages.
For shinny metals such as stator and clutch covers we’ll go another route. Begin by purchasing a few assorted buffers to fit your electric hand drill and a few different grades of jewelers rouge which come in sticks. These are compounds made to smooth and clean metal at high rotating speeds. Apply the rouge to the buffer and buff until you get the desired look.
One final destination for rust you will never be able to reach with your hands is the gas tank. Never fear, there is a product that will help you remove it all and protect it against rust in the future. It’s called Tank Kreem and you can get it at better motorcycle stores. Tank Kreem allows you to get the rust out of your tank and coat it with a polymer which will keep moisture off the metal of the tank in the future. Follow as directed and don’t be shy about letting the process take longer than expected. If you have a lot of rust in your tank it will take anywhere from 6 hours to overnight before it’s all loosened up.
Grab your tank and take it to the hardware store. There you can find corks that will fit the top opening and the petcock opening. While you’re there be sure to get some metal nuts and bolts to add in and shake around while it’s in process to help release rust deposits. Use a magnet on a wire to retrieve them after the second step of the process and test them first with the magnet to insure they are metal and not aluminum before inserting them into the tank.
In general clean every nook and cranny of the bike well and be generous with your water and solvents.
Bag It
As you break down the bike place corresponding parts into your plastic bags so you can keep them together as you clean and rebuild them. This will make it much easier to set up for your rebuild later too. Imagine a nice tidy row of bags and you just go one by one!
Photo It
If you’re short on visual images of the bike in various sections, say you lack a good repair book or the owners manual, use a camera as you break it down to photo areas that might otherwise leave you clueless on the rebuild.
Order Suzuki Motorcycle Accessories News
Suzuki Launches Hayate in India - Wall Street Journal
 Wall Street Journal | Suzuki Launches Hayate in India Wall Street Journal By ANIRBAN CHOWDHURY MUMBAI – Suzuki Motor Corp. Friday introduced a 112 cubic centimeter motorcycle in India, coming into direct competition with market leaders Hero MotoCorp Ltd. and Bajaj Auto Ltd. The company will sell the Hayate for 41504 rupees ... Yamaha to launch world's cheapest motorcycle in India at less than Rs 28000 ($500) Yamaha India to build the Nano of motorcycles, with a sub $500 low cost entry ... |
Suzuki goes commuter with Hayate - Hindustan Times
Wall Street Journal | Suzuki goes commuter with Hayate Hindustan Times In the season of entry level motorcycle launches, Japanese two-wheeler maker Suzuki Motorcycle on Friday launched its first commuter segment motorcycle Hayate at a price tag of Rs. 38212 (ex showroom Delhi). entry level mobike Yuga, which is priced ... Suzuki two-wheelers launch mass segment motorcycle Hayate |
Motorbike road racer Mark Buckley killed in crash - The Press, York
Motorbike road racer Mark Buckley killed in crash The Press, York TRIBUTES have been paid to a motorbike road racer and a former lead rider for a York-based team, who has been killed in a crash. Father-of-four Mark Buckley, who was once at the helm of Team York Suzuki, died in hospital after coming off his bike ... |
Upstate NY biker loses license for 170 mph ride - CBS News
 7Online WSVN-TV | Upstate NY biker loses license for 170 mph ride CBS News RAVENA, NY — A 25-year-old upstate New York man has admitted driving his motorcycle at 170 mph as he tried to get away from police who caught him speeding on the Thruway. The Times Union of Albany reports (http://bit.ly/MqQHl0 ) that Nikkolaus ... Biker's license gone for 90 days |
Lucas Oil Motocross Notes: Freestone 2012 - MotorcycleUSA.com
 Ultimate MotorCycling | News and Reviews | Lucas Oil Motocross Notes: Freestone 2012 MotorcycleUSA.com James Stewart made an impressive debut on his new Yoshimura Suzuki RM-Z450, earning a 1-1 finish. Last weekend, James Stewart made a memorable return to the Nationals, winning his first race since August of 2010 and kicking off his new relationship ... Lucas Oil Pro Motocross Heads to the Heat of Texas Motor sports notebook: Healthy James Stewart eyes Texas AMA MX: Weimer Wins RC Hard Charger Award |
Woman dies, man hurt when truck reverses into motorcycle's path - Tbo.com
Woman dies, man hurt when truck reverses into motorcycle's path Tbo.com By TBO.com A 34-year-old woman was killed and a 33-year-old man was injured when a truck reversed into the path of their motorcycle Thursday afternoon, deputies said. Pamela Bronson, of Brandon, was a passenger on a 1999 Suzuki motorcycle driven by ... |
AMA Pro Road Racing Brings the Battle to Miller Motorsports Park - WhoWon.com
 RoadracingWorld.com | AMA Pro Road Racing Brings the Battle to Miller Motorsports Park WhoWon.com Leading the Motorcycle-Superstore.com SuperSport charge heading to Miller Motorsports Park, defending series champ James Rispoli (Celtic Racing/Orient Express Racing Suzuki) has finished no lower than fourth in six starts this year. AMA Pro Racing Miller Preview 2012 AMA ProSbk: Brings the Battle to Miller Motorsports Park AMA SBK: Heavyweight Battle Heads To Utah |